Orthopedic penis enlargement devices have been used by men for more than a decade and have proven themselves well. The most used device is called an extender, which is translated from English as an expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both a purchased (factory) and homemade extender. It's pretty easy to make. The important thing is to have the necessary materials and basic knowledge of the mechanics of the intimate apparatus.
Types and effects of extensors
The device works on the principle of proliferation of the corpora cavernosa. This occurs under conditions of regular tension of the tissues due to the periodic unwinding of the axes in the direction of increasing length. The growth of new tissue does not stop; cells divide under the constant influence of the distracting force.
Average growth rates, according to user and manufacturer reviews, are an increase in length of 2 to 5 centimeters over a period of 6 to 10 months. You should not expect immediate results. It will take patience and regular use of the extender. Violation of this recommendation will result in failure to achieve the desired effect.
Depending on the method of fastening, extenders are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum extension
The girth is carried out using a special vacuum chamber. It covers the head of the penis approximately 3-7 centimeters in circumference. It is considered the most reliable and safe. The risk of injury is practically reduced to zero, as there is no risk of compression.
Penis enlargement extender
Loop and extension for strap
The mechanics of the fastening is almost the same, but the shape of the fastening is different. In the first case a ring is used, and in the second a strap. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, cutting off the blood supply to the reproductive organ, but it remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of fixtures listed. The most difficult one to make will be the vacuum one because you will have to create a chamber. Otherwise, the process will not have any significant differences.
Drawings
Create a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of any well-known manufacturer. Based on a photograph, a drawing, a video, they draw their sketch. The length of the side posts is selected based on the desired result. It can vary from 20 to 25 centimeters.
Required materials and tools
A homemade extender at home is assembled from the same parts as the factory one. The specific materials depend on the type of structure to be assembled:
- The stop ring, straps and rings are in direct contact with the skin and must not cause allergic reactions. This imposes certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic/plastic without sharp edges. Its internal diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use, which is changed every time.
- The slats (side rods) are selected in such a way that they can fix the required length for a long time. These can be molds, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, such a homemade product will not work.
The difference between the devices lies in the fastener. If you decide to make a variety with a camera, you should give preference not to a plastic bottle, as written in some sources, but to purchase a special jar. These are sold in pharmacies. This ensures the creation of an internal vacuum.
Homemade schematic extender
Step by step assembly instructions
The manufacture of a belt or ring device involves carrying out the following sequence of work:
- From a piece of plywood or other material no more than 10 mm thick, a piece with a diameter of 11 cm is cut out. A hole is drilled inside with a circumference of at least 5. 5 cm. Other sizes are determined by the cross section of the penis.
- The length of the rods is 20-30 cm. They are screwed completely into the plywood, leaving a little on top. The entrance places are filled with glue.
- On each they screw a "lamb".
- The strips are cut from a thin metal plate and holes are drilled inside them.
- A cable tie made of soft tubes or a strap is inserted into the holes, which can be used as a wide medical tourniquet.
- Check the reliability of fixation.
The assembly of the vacuum variety differs only in that a jar with a pear is attached to the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius varies from 13 to 25 mm. It is selected based on the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made with elastic surgical gloves.
The air will be pumped thanks to a light bulb or a hose connection. You can use the tonometer element. The shut-off valve is unscrewed from it and inserted from the other end. This allows you to change the operating principle. The pear will start to pump out instead of pumping out air. As you can see, you will have to fiddle more than with a strap and ring device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help, clearly showing how the elements are connected and what materials they are made of.
Penis enlargement extender - tied below the knee
How and when to use it?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organ or wants to have more of it. To increase the size of the phallus, you need to wear a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. The people around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly over your pubic bone.
- The foreskin is retracted and a camera, ring or strap is attached to the glans. It is necessary to ensure that the blood flow is not interrupted (no excessive pressure, changes in the shade of the integument).
- Adjust the length of the rods. There should be no painful sensation. The parameter is gradually increased, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
Whenever possible, massage your penis every hour. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the flesh is kneaded with special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the possibility of trying the stretcher without purchasing the device;
- relative cheapness;
- obtain a design that fully corresponds to the parameters of the phallus.
In reality the advantages are very few. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that will ideally turn over, put on, take off and not press anywhere and not slip off.
Which extender is better: factory or homemade?
To answer this question, simply compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods each time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a model of the vacuum. By the way, it is usually less effective than homemade ones with a loop and strap.
- Cost, which has been cited as an advantage, is a relative advantage. Today there are Chinese models that cost 1-3 thousand rubles. This is no more expensive than a homemade extender. Nobody will sell half a meter of hairpins or 20 centimeters of textolite. You will have to purchase a lot more material that will sit idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, since it will be inconvenient to use. You have to spend a lot of time putting it on and taking it off, and taking into account the fact that self-massage is periodically recommended, it is even less effective.
One conclusion can be drawn: the factory device is better. To try this penis enlargement method, you can simply purchase an inexpensive model
What risks could there be using a homemade device?
Experts and experts do not recommend assembling an extender yourself without the appropriate skills. If the device turns out to be "clunky", presses, presses, causes discomfort, it is highly not recommended to wear it. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device will not have an efficiency lower than the factory one. It will just be aesthetically unappealing. Otherwise there will be no difference, but here too there is a nuance. Many users write that with prolonged use hematomas, compactions and irritations form on the dermis.
This may be caused by low-quality materials. Finding medical silicone in the pharmacy is almost impossible. If one is sold, its properties leave much to be desired and with prolonged contact negative consequences begin to appear.